Microburbs
Reel

Sydney vs Melbourne trains: which network is better connected?

Take out the city, and Melbourne's trains fall into three pieces. Sydney barely notices. It changes how easily you can cross town without going through the middle.

Luke Metcalfe, Founder, Microburbs · 16 November 2026

96%
Sydney trips that still work without the city
40%
Melbourne trips that still work without the city
3
Pieces Melbourne falls into
1 in 6
Sydney trains that never enter the city

What we found

  • Melbourne has more stations. It has 225 metro train stations, against 176 in Sydney (timetables for Tuesday 13 October 2026).
  • But nearly every Melbourne line runs into the city. Take the city stations out, and the network splits into three pieces.
  • Sydney stays in one piece. Without the city, 96% of trips between its stations still work. In Melbourne, 40% do.
  • Sydney runs more trains around the city. One Sydney train in six never enters the city that Tuesday. In Melbourne, one in 20.

Our research: How Sydney and Melbourne compare, suburb by suburb

The story: how did Melbourne's train network grow?

Melbourne opened Australia's first steam railway in 1854. It ran from Flinders Street to Sandridge, now Port Melbourne.

The lines that followed all fanned out from the city. Frankston, Pakenham, Lilydale and Belgrave in the south-east. Craigieburn, Sunbury and Werribee in the north and west. Mernda and Hurstbridge in the north-east.

The City Loop opened under the city in 1981. It joined the lines in the middle, not out in the suburbs. Outside the city, Richmond has the most lines, with six.

What happens when you take the city out?

Melbourne falls into three pieces. The south-east holds 117 stations, from Frankston to Belgrave and Glen Waverley.

The north and west hold 57 stations, on the Craigieburn, Sunbury, Upfield, Werribee and Williamstown lines. Mernda and Hurstbridge hold the last 41.

So a Frankston train cannot reach Craigieburn or Mernda without the city. Box Hill and Heidelberg are 9 kilometres apart, but 27 kilometres by train.

Sydney loses only three stations at the end of one line. Kings Cross, Edgecliff and Bondi Junction are cut off. Everything else still joins up.

How did Sydney's trains end up joined up?

Sydney's first railway opened in 1855, from Sydney to Parramatta. The Harbour Bridge carried trains to the North Shore from 1932.

Sydney's lines cross each other well outside the city. Redfern has six lines, Lidcombe five, and Strathfield and Burwood four each.

Outside the city, 18 Sydney stations have three or more lines, against 11 in Melbourne.

Some Sydney lines skip the city altogether. Every Cumberland line train runs from Leppington through Parramatta, never the city. In all, 490 of Sydney's 3,128 trains that Tuesday never entered the city.

What does it mean when you buy?

In Melbourne, how far you are from a station is half the story. The other half is where that line goes.

A home on the Frankston line connects easily with the south-east. Reaching the north-west by train still means a change in the city.

In Sydney, a station where several lines meet opens up much more of the city. Lidcombe links five lines, Strathfield four and Parramatta three.

How we made this reel

  • Every train, one ordinary weekday. We took the public timetables for Tuesday 13 October 2026 in both cities.
  • Then we took out the city stations. Central to Barangaroo in Sydney. Flinders Street, Southern Cross, the City Loop and the new tunnel stations in Melbourne.
  • And counted what still joins up. For every pair of stations left, we checked if a train still links them.

What it means for you

  • Check the trip you will make every day. In Melbourne, two suburbs close together can be far apart by train.
  • Look at the walk to the station. Every suburb report shows how far each pocket is from a station.
  • Count the lines, not just the station. A station where several lines meet gets you further without going through the city.

Where to see it on Microburbs

  • Transport, in every suburb report. Open Lifestyle and read the walk to the nearest train station, bus stop and tram stop.
  • Pocket by pocket. The report splits each suburb into small areas, each with its own walk to a station.

See transport in St Kilda (Vic.) →

Get the data

The walk to the nearest train station, tram stop and bus stop is live in our API, for every small area of every suburb. In St Kilda, Melbourne, half the homes are within about 980 metres of a train station, and 96% are within 400 metres of a tram stop, across 14,197 homes read on 10 November 2026.

Try it now, free. This request is free for our sample suburbs, one in each state and territory, with no sign up and no card:

curl "https://api.microburbs.com.au/v1/suburbs/St%20Kilda%20%28Vic.%29/mesh-blocks/transport" \
  -H "Authorization: Bearer test"

What it sent back on 10 November 2026, cut down to one of its 370 small areas and three of its fields:

{
  "data": {
    "suburb": "St Kilda (Vic.)",
    "state": "VIC",
    "topic": "transport",
    "block_count": 370,
    "mesh_blocks": [
      {
        "mb_code": "20520220000",
        "population": 33,
        "dwellings": 32,
        "fields": {
          "train_station_nearest_m": {
            "value": 1795.16,
            "label": "Nearest train station",
            "unit": "metres"
          },
          "tram_stop_nearest_m": {
            "value": 117.27,
            "label": "Nearest tram stop",
            "unit": "metres"
          },
          "bus_stop_nearest_m": {
            "value": 98.27,
            "label": "Nearest bus stop",
            "unit": "metres"
          }
        }
      }
    ]
  }
}

See the full API docs for every request, the price of each and how to get a key for the rest of Australia.

How far is your street from a train station?

Transport, in every suburb report. Open Lifestyle and read the walk to the nearest train station, bus stop and tram stop.

More reels